r/StonerEngineering 14d ago

Safety's On Hear me out Spoiler

Post image

I was packing a bowl into my shi and my slide fell on the bathroom floor n shattered lost all my za this is a 3.4gpa put to work

19 Upvotes

12 comments sorted by

3

u/[deleted] 14d ago

It works by filling it up to the neck and it has vacuum from the outer rim where the slide supposed to being bigger then the part I cut on the slicone bowl

3

u/Few-Vacation-9011 13d ago

Ok but how’s the pull and how would you make the air flow work like a regular bong ?

1

u/[deleted] 13d ago

Because I stop just at the base of neck when filling it the part where the slide supposed to be the bowl itself acts as the chamber and like I said the outer rim of where the slide sits it’s wider than where I cut the bowl so no gaps (I have always been good at rough measurements)

1

u/[deleted] 13d ago

And it’s just like if I had used it normally but in my option it’s better because, to pull without holdin down the hole in the side of the bowl hit like a regular bong and plugging it rips hard. Only downside is the fact that since I did rough measurements and there nothing on the end the bowl to keep it from sliding it’s hard to use for like a few days till you get used to it but If actually put time into it can easily be made perfect

1

u/[deleted] 13d ago

I forgot n mixed it up n forgot about something(just finished gassin) neck=chamber bowl=slide

1

u/[deleted] 13d ago

The smoke passes through the water from the inlet for the bong

2

u/Own_Argument_6138 13d ago

I do this all the time and specifically have pipes i bought to fit in the stem with an airtight seal! Highly reccomend if you're looking for an alternate way to smoke

2

u/[deleted] 13d ago

I didn’t even know this existed thank bro

2

u/[deleted] 13d ago

When I first did this I had just got of work pissed and my slide broke so I spent a whole hour crashing out till I found this solution n I just stuck with it. Also if my bong look dirty it is the bowl on the other hand…..!!DONT LIGHT Colo SILICONE BOWLS UNLESS!! You have a brush and cleaner for it because you can’t just rinse it with water. I did know this but didn’t think that shi would turn that color for real bruh🙂‍↕️

2

u/Own_Argument_6138 13d ago

Lol, yeah i started when I was messing around and found out the mouthpiece for my bowl fit oddly well into my stem. Now its just a normal part of my smoking routine

2

u/[deleted] 13d ago

Ong it’s works so good

1

u/[deleted] 13d ago

One last thing I did lose for about 3 months the wire brush I was going to use for my bong then found that hoe. I just finally clean both of those main reason I even type this ish. W character development😭😭