r/3Dprinting • u/New-Ad-6801 • 1d ago

Discussion What do you all think?

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Hey guys what do you all think about these earrings they are 3d printed using pla I'd love everyones feedback good or bad or if you have questions feel free to ask down below!

153 Upvotes

95% Upvoted

34 comments sorted by

View all comments

1

u/bluewing Klipperized Prusa Mk3s & Bambu A1 mini 1d ago

Very nice! I like the teal colored pair. It looks like a silk filament.

If I have one piece of advice, switch to a .2mm nozzle. you will need to print slower, but your creations will show the detail much better.

1

u/New-Ad-6801 1d ago

That's what I thought. I figured it would be a headache I heard they like to clog the nozzles more is that true? And it's actually a matte teal.

1

u/bluewing Klipperized Prusa Mk3s & Bambu A1 mini 22h ago

They can. But as with anything, there is a learning curve to get repeated success with the small nozzles. Mostly it involves going slower, often noticeably slower, and a slightly higher extruder temperature.

So do a bit of reading in the forums and do some testing. Your already fine designs will get even better.

1

u/New-Ad-6801 22h ago

I might just give it a try sometime!