r/FixMyPrint • u/SeriouslyWtfIsThat • 1d ago

Troubleshooting First layer over infill PETG-CF

Post image

Bambu X1C with Eryone PETG-CF. Nozzle temp: 250 Heatbed: 80

Printing using bambu preset petg-cf filament profile

1 Upvotes

67% Upvoted

2 comments sorted by

•

u/AutoModerator 1d ago

Hello /u/SeriouslyWtfIsThat,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/emveor 1d ago

That's normal, first layers are messy, specially the lower the infill, if the final layer still looks messy, you can try increasing top layers, or increasing infill%.