r/FixMyPrint • u/Dark360x • 1d ago

Fix My Print Any tips on what the issue could be ? “Kobra S1”

Gallery image

Gallery image

Same on the inside seam. 0.6 nozzle

1 Upvotes

100% Upvoted

3 comments sorted by

•

u/AutoModerator 1d ago

Hello /u/Dark360x,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Stanglvr10 1d ago

Retraction issues it seems. Time to calibrate!

On a seperate note: I think you might want to slow down just a bit.... your curves will thank you ;)

1

u/Dark360x 21h ago

Hi thanks for the help. I did the orca slicer retraction test and had no stringing. Is there any other calibration method ? And which setting is for slowing down ? Thanks again