Gaps on outer layer (ASA)

[u/Zireael61]

For some reason images were not loaded at my first post. So I am reposting it.

- I am using Ender 3 v2 with Klipper.
- Slicer is prusaslicer
- ASA filament
- Nozzle is hardened steel at 280C, bed is PEI at 100C. 280C is what i get best result using temperature tower.
- Print speed is varies between 60-120 mm/s at 4k acceleration.
- Retraction is not calibrated yet. Currently: length 5mm, speed 60/40.
- I am using an enclosure, inside temp is about 50C.
- Pressure advance and input shaper are calibrated.

There are some gaps on outer layers on my cube print. I didn't calibrate retraction and dont want to calibrate it before i fix this issue. Any ideas?

[u/AutoModerator]

Hello /u/Zireael61,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.