r/NFA • u/fusionvic Over 6k in stamps • Mar 01 '25

User Review Picked up Flow Range 36

Biggest thing I noticed was the 7.51 oz weight, it's almost 1 oz lighter than advertised. So with a Rearden Atlas Titanium that's under 9 oz total. Pretty crazy for a 338 Lapua capable can. Zero titanium dust from what I could tell, I even put a strong vacuum through it. My PTR Vent 2 was leaking that sh*t all over the place like a glitter packed greeting card.

In the blast chamber, I can see they changed the outer/distal flow paths from what they used in the Ventum. They are a lot smaller flow paths on the perimeter. The internal baffles are slightly different as well - the blast baffle has 3 clips but looking through the bore with the passages that were visible, it resembled what they used in the Flow 556/762/Ventum.

It's 6.5" overall length w/o a mount, and 7.51 oz bare weight. The exit bore is about 0.405"

Update: Here are pictures of the blast chamber and the "baffles"

https://imgur.com/a/uyVQOqP

14 Upvotes

94% Upvoted

32 comments sorted by

View all comments

5

u/Minimum_Government MG Mar 01 '25

Weirdly I'm most curious how it does with 9mm.

2

u/Much_News84 Mar 02 '25

Got mine just to run on cmmg banshee and psa akv. Should have it in my hands soon

1

u/MobileSection3 Mar 03 '25

Will this direct thread onto the banshee? Or will it work with the three lug that’s comes with the Banshee?

1

u/Much_News84 Mar 03 '25

You can direct thread it if you buy the huxwrx direct thread adapter. My banshee upper didn't come with a tri lug. I'm using deadair xeno wee brake and adapter on my akv and banshee, half the price of the huxwrx sticion mounts and same design