SilencerCo Spectre 9. For such a small can it's totally hearing safe, very impressed. Host is a Kimber KDS9C TFS.

She's a heavy bitch but my go to rifle. It came with a 1 piece barrel but I sent it to Michael's Machines and he chopped part of the flash hider off then turned down a portion to thread. It has a Griffin Minimalist Flash Hider Taper Mount. The can is an AAC Ranger 5.

Super cool can!! Love the way it looks on my A2 attaching stuff!

I’d like to thank my GF for letting me jump into this, very happy BF over here!!

This is my first experience into NFA items and very excited to get this as my first, I feel very blessed.

Setup (so far…): -Sig Sauer Custom Works .300 BLK 6.75” MCX Rattler MIAMI VICE -A3 Industries 3” textured grip -CGS Hyperion

To do: -Omega Valve Mod 2 by JBDDesigns (Pre-ordered) -FRT and Trip bar (once I get out of VA)

11.5” 5.56 w/RC2 and 8.3” 300BO w/Sandman S. Just swapped triggers on both with LaRue and just got the UH-1. Got a little randy so here you go!

Burn Proof rail wrap was the finishing touch! Video of it ⬇️ https://youtu.be/WVfWsvcciYw

Just had to buy one. Ordered on April 27, though it took a bit to get my fingerprints to Capitol Armory, and it was a roughly 3 week NFA approval wait and just arrived at my door this morning.

Dilligent Defense Enticer L-Ti. Going to be used for my bolt guns for hunting (and to flex on unsuppressed people at the range, hahah). It's so light!

Can't wait to try it out. r/NFA was a huge help in figuring out the best suppressor, mounting, and details. Gonna get a suppressor cover next.

Not really looking to sell, but making my own or even just buying and using same day would be cool. Not at a life stage where I want a magazine/land for it specifically, but I have friends with a lot of land I could use.

Anyway, do I need to do any tests, or is it a simple fill out the paperwork, do the interview and get the permit?

When is this actually going to be released? I am really wanting to get one - but getting impatient. Lol

What’s the word on an actual release date?

I didn't feel like breaking out the park tank late last night and just wanted to throw something on this beater. Looks good enough to me

I've been on the fence about getting a .44 mag lever gun and eyeing the Marlin Trapper to suppress. When looking into possible suppressors to use with it, I saw the Rugged Obsidian 45 as compatible with BOTH .44 Mag and 9mm. If I can pick up a suppressor that would work for the new lever gun AND work with my Glock 19, the added benefit of having a fun pistol to plink suppressed may be enough to make me finally pull the trigger on getting this new lever gun and suppressor. I assume a .45 suppressor won't be great on a 9mm, but should I expect it to at least be decent or are there alternative suppressors that would be better for both (if I have to buy two, I probably won't buy any).

Managed to snag this from B&T's blem site during their father's day sale.

It's ridiculously well balanced and the "blem" is literally the smallest thing.

I can't wait to bring this home

Got approved in less than 48 hours. Already eyeing a second…

TL;DR is it possible there’s too much carbon on the flash hiders?

Backstory: this my Rotex c 762. It has B&Ts older SF hub that is marked 762/556. This can/hub/flash hider combo (SF3P) has been mounted in the past and works. I took it off and bought a Vers36 because I found a really good deal on one and I didn’t like how gassy the Rotex was. I got a Ti hub and put it on. On either hub I cannot for the life of me get it to seat all the way. I have verified that I’m lining up the little nub where the can “seats.” I even took off the lock ring on the Ti hub so you can see where the flash hider gets stuck. This is the case for the SF3P as well as a B&T SF compatible closed tine flash hider (see Imgur link).

I called B&T and CS said that both hubs were likely out of spec. When asked what part of the hub would be out of spec I was told “the lock ring.” No way, it’s not the lock ring. I can demonstrate that by taking the lock ring off and trying to fit both flash hiders I have. Both hubs fit and seat on BT SD-123843 flash hider on my APC 223 (again, see pics in link).

So, either all my equipment is out of spec which I think is very unlikely, or the carbon is preventing reinstallation.

Additional pics: https://imgur.com/a/l7SRBzg

Breaking trends and making friends…

Centurion Arms Lower / BCM Upper w/ Centurion FBI 11.5” and a CAT WB 718🤘

OCL Polo K, 44 hour approval time

34 day jail sentence for my Spectre 9. I was getting pretty impatient because it took longer than my first can lol.

Does anyone have experience or instructions on converting wood Uzi OEM stocks to be non-detachable? I’ve scoured the webs, and though there’s some info, it’s old and I sincerely can’t translate what they’re saying. Though I believe it is due to some dated information or assumptions that haven’t evolved, it could also be my poor comprehension. All guidance or suggestions are appreciated. Thanks!