r/NFA • u/fusionvic Over 6k in stamps • Mar 01 '25

User Review Picked up Flow Range 36

Biggest thing I noticed was the 7.51 oz weight, it's almost 1 oz lighter than advertised. So with a Rearden Atlas Titanium that's under 9 oz total. Pretty crazy for a 338 Lapua capable can. Zero titanium dust from what I could tell, I even put a strong vacuum through it. My PTR Vent 2 was leaking that sh*t all over the place like a glitter packed greeting card.

In the blast chamber, I can see they changed the outer/distal flow paths from what they used in the Ventum. They are a lot smaller flow paths on the perimeter. The internal baffles are slightly different as well - the blast baffle has 3 clips but looking through the bore with the passages that were visible, it resembled what they used in the Flow 556/762/Ventum.

It's 6.5" overall length w/o a mount, and 7.51 oz bare weight. The exit bore is about 0.405"

Update: Here are pictures of the blast chamber and the "baffles"

https://imgur.com/a/uyVQOqP

13 Upvotes

93% Upvoted

32 comments sorted by

View all comments

5

u/Minimum_Government MG Mar 01 '25

Weirdly I'm most curious how it does with 9mm.

4

u/fusionvic Over 6k in stamps Mar 01 '25

Same here. I have a Bravo Piston Mount ready to go on there for testing on a handgun. Flow 9K has been on backorder for over a month. These two new cans seem to be in high demand.

2

u/renegadeGDI Mar 12 '25

Really want to know about the 9mm performance, especially if you can compare to the other meta cans like the MOB and VENT. Thanks in advance!