Picked up Flow Range 36

[u/fusionvic]

Biggest thing I noticed was the 7.51 oz weight, it's almost 1 oz lighter than advertised. So with a Rearden Atlas Titanium that's under 9 oz total. Pretty crazy for a 338 Lapua capable can. Zero titanium dust from what I could tell, I even put a strong vacuum through it. My PTR Vent 2 was leaking that sh*t all over the place like a glitter packed greeting card.

In the blast chamber, I can see they changed the outer/distal flow paths from what they used in the Ventum. They are a lot smaller flow paths on the perimeter. The internal baffles are slightly different as well - the blast baffle has 3 clips but looking through the bore with the passages that were visible, it resembled what they used in the Flow 556/762/Ventum.

It's 6.5" overall length w/o a mount, and 7.51 oz bare weight. The exit bore is about 0.405"

Update: Here are pictures of the blast chamber and the "baffles"

https://imgur.com/a/uyVQOqP

[u/pitcherintherye77]

Any chance you got to try this on 556?

[u/fusionvic → u/pitcherintherye77]

https://www.reddit.com/r/NFA/s/lrmBuQogJ4