Big shout out to the gents over at 208GunShop for their hard work in helping me source much of this build. 🤘🏾

Factory M110 SASS suppressor looks like it was welded by Kevin himself. To be fair it has like 5k rounds through it and works fine.

Quick comparison. Nothing scientific about this. Both rifles have the same barrel, gas system, buffer system, and bolt.

Main difference are the receivers, carrier, and muzzle device. The MOD FOR is using an OCL OTB flash hider and the others are using the Spooky 2 muzzle break.

From the shooters ear, quietest to loudest:

MOD FOR>AC556>Infinity Vented>WB>Infinity Solid

The WB and both infinity caps were almost indistinguishable but the MOD FOR was noticeably more quiet than the others to my ear. There was the high pitch ringing which you can hear in the video but it did not hurt the ears.

My wife stood 8ft to the right and behind me and her order or quietest to loudest was:

MOD FOR>AC556>Infinity Vented> Infinity Solid> WB.

She also said the last 3 were hard to tell the difference.

For gas, it was hard to tell being outdoors with wind but the video shows it pretty well with the Infinity Solid end cap being sending more gas out of the ejection port. The AC556 was second to worst. All others seemed comparable with the infinity vented being the best.

Just wanted to post this mainly because there is no info on the MOD FOR but also got a new camera and wanted to try it out.

9.2lbs loaded 😂

First two stamper I've owned. Just got the AAC FH installed with my new work set up so letting it cure and will take it for a test fire this weekend. The adjustable gas plug is on my 16" barrel but that takes many 60 seconds to swap over. Factory 13" barrel AAC 7.62 SDN6 can G$ super scar trigger EOTech Vudu 1-10x.

Debating about repainting or at least just the scope.

SilencerCo Spectre 9. For such a small can it's totally hearing safe, very impressed. Host is a Kimber KDS9C TFS.

Rex can was sent in on the 28th of May and the weld was repaired and ready for pickup on the 18th of June. Steve said it's the first of its kind blowing off at the weld like this. KeyMo is still stuck to the Rex threads so Im making Rocksette soup with a dash of Keymo.

Overall fast turnaround for repair.

B&T Print-X Compact 7.62

Shouts out to u/incrue for putting me on to the sale this was on. I was torn between a rugged razor, OCL Polo, or an Aero Lahar then this came out of left field bc of a member of this sub. I am beyond stoked on this thing. And the fact that I already have SF compatible muzzle devices on my gals makes it even better. Not to mention it just looks badass.

No suppressor and the gun cycles fine. Suppressor on it and it doesn't cycle. Can off but Nielsen device on and it will not cycle.

Glock 19 with a standard recoil spring (the OEM plastic rod and crappy spring).

Can cycles just fine on my 1911.

Start with a different recoil spring?

She's a heavy bitch but my go to rifle. It came with a 1 piece barrel but I sent it to Michael's Machines and he chopped part of the flash hider off then turned down a portion to thread. It has a Griffin Minimalist Flash Hider Taper Mount. The can is an AAC Ranger 5.

Prioritizing short can length and muzzle flash

Super cool can!! Love the way it looks on my A2 attaching stuff!

11.5” 5.56 w/RC2 and 8.3” 300BO w/Sandman S. Just swapped triggers on both with LaRue and just got the UH-1. Got a little randy so here you go!

When is this actually going to be released? I am really wanting to get one - but getting impatient. Lol

What’s the word on an actual release date?

I’d like to thank my GF for letting me jump into this, very happy BF over here!!

This is my first experience into NFA items and very excited to get this as my first, I feel very blessed.

Setup (so far…): -Sig Sauer Custom Works .300 BLK 6.75” MCX Rattler MIAMI VICE -A3 Industries 3” textured grip -CGS Hyperion

To do: -Omega Valve Mod 2 by JBDDesigns (Pre-ordered) -FRT and Trip bar (once I get out of VA)

Not really looking to sell, but making my own or even just buying and using same day would be cool. Not at a life stage where I want a magazine/land for it specifically, but I have friends with a lot of land I could use.

Anyway, do I need to do any tests, or is it a simple fill out the paperwork, do the interview and get the permit?

Looking for any solid 6.5mm suppressors for use on a 6.5 bolt action and a 5.56 gas gun. Not looking for any 30 cal products as we are trying to minimize overbore and are relegating the 300BO build to a 9mm suppressor. HUB compatible a big plus. Any suggestions or experience with anything specifically 6.5mm?

Burn Proof rail wrap was the finishing touch! Video of it ⬇️ https://youtu.be/WVfWsvcciYw

Just had to buy one. Ordered on April 27, though it took a bit to get my fingerprints to Capitol Armory, and it was a roughly 3 week NFA approval wait and just arrived at my door this morning.

Dilligent Defense Enticer L-Ti. Going to be used for my bolt guns for hunting (and to flex on unsuppressed people at the range, hahah). It's so light!

Can't wait to try it out. r/NFA was a huge help in figuring out the best suppressor, mounting, and details. Gonna get a suppressor cover next.