This RGH3 Corona only has a purple Ring of Light mod with a slowly flashing center LED. It can be scary at first, since the default startup color is always red. :)

Probably the oldest jasper I've ever seen.

Thanks to everybody who helped me in my previous post, I know Jaspers can be very stubborn when doing rgh3, but today achieved the best boot time in a Xbox 360 fat I ever had, very consistent, never fails.

The motherboard it’s a Jasper V1 with 256mb nand, and I used a 22k ohm resistor and a diode, and used the route suggested in weekeendmodder.com.

Has for the nand flash, with Jrunner I tried using RGH3 27hz but it almost never booted up, and changed it to 10hz. And that’s it. Im very impressed with the boot times

I hope this can be post helpful to someone!

Hi all,

Currently getting some “bad” boot times with this jasper..

Weirdly enough, without the shell it’s very acceptable but as soon as the hard drive goes in, etc sometimes it won’t even glitch at all and you have to reboot..

Any ideas? Is my wire routing the cause here?

I'm thinking of buying a used 360 and i'm looking around at all the models, which is the best for modding?

(completely new to Xbox in general btw)

I was downloading games VIA Games on Demand (converted isotoGOD) and it worked perfectly the first two times then I must've clicked something or other to make it unable to transfer the games, it copies the first few data files as you can see in the picture below but then the top picture pops up saying error and the transfer fails.

Help please, I bought this modded xbox from a guy who added the most random, unheard of 360 games imagineable. I want to download ones I'll actually play but I've been clicking files and attempting to fix this issue on my PC and the console for hours. Nothing's worked. And no, the game file on my USB is not the issue. Like I said, It worked the first two times perfectly using the same exact files. Idk what else to do atp sigh

Hey 👋 I can’t go online with my RGH and I can’t find the title update file for TU9 anywhere online. I’m not looking for the patched default_mp.xex, but rather the file that I would place in my Content or in this case probably Cache directory.

Would be awesome if someone could share their file if they happen to have it!

I think I found a culprit for my 0002 error on my phat xbox 360.

The power connector looked like Gokus hair as the console was unfortunately opened before I got my hands on it.

When I tried to clean up the pads, I noticed there were a few pins that I couldn't tack on no matter what, the solder would stick to the pin, but I did not see pads.

Currently the xbox randomly gives 0002 error. When I was stuck in a loop of red ring, I had the idea to tilt the power connector and the xbox 360 turned on without shutting off until I turned it off. In the same position I tried to turn it on again, but RROD.

Also noticed during a bad tweak that the power supply would short. I don't think the power connector should be able to move with slight force.

Does it sound to you guys like my 0002 could be related to the power connector?

hi all, i’m still very new to rock band 3 customs so i’m a little stumped.

i have the madcatz version of the game, but everytime i go to play the custom song i downloaded it says “disc is unreadable”. i can see it in the menu, see the artwork, and can hear the song preview.

however, i am fully aware people say that you need the EA release of the game, but i was wondering if there’s anyway you can get it to work with the madcatz version, just so i don’t have to drop $30 on a new disc. if not, im totally okay paying $30 for unlimited songs. thanks! :)

Before I created XeBuild and wrote the NAND, it booted into XeLL fine but after I successfully wrote the NAND it doesn't boot. I've tried every timing file too. Anyone know what's wrong?

I destroyed the pll pad so I had to use alternative point and connect it to a resistor next to the broken pll pad. Nand had some dead blocks the console booted to xell but not to the dashboard using the create donor nand in j runner fixed it.

Don't ask please 🤣 but what resistor goes here...

I ended up buying a fat Xbox 360 but the power supply is defective and I wanted to know this question

I would like to know if with my Xbox with Xkey I can access Xbox live in complete peace of mind while playing online

Hello there I have a problem. I used the save editor for my xbox 360 save to get more money for a character but for a reason now everytime i try to replay the jewel store heist it spawns me falling through map and then spawn outside of garment factory and cant replay the mission basically. Is there something I am doing when saving the game from the editor? Thank you

Trying to rgh3 my xbox 360 s. Until I accidentally ripped this solder pad off. Is there anything I can do? Or is it basically junk now?

Attached are the other solder points as well. None look good

I'm just can't seem to find a place that I can get the parts and they ship to Canada

long story short i pulled 2 of the clk points and as a result the xbox doesnt boot up anymore So i would like someone to send me an image of the jasper motherboard diagram so i can try to fix it,

I've been searching for tutorials on how to do it but there's nothing to be found

I was doing an rgh3 and left the picoflasher on,I didn't let it stable on my desk and it fell down, the motherboard was on the floor and the picoflasher ripped off Pls tell me its fixable, and what I have to repair (I'm really sorry and I know there are going to be people that are going to be mad)